Truss Building Blocks for Onshape
Every first-year Mechanical Engineering group at TU/e builds the same thing in 4CBLA00: a 1:3 scale truss crane made from a fixed kit of steel profiles and M4 bolts. Most students start with little CAD experience. This free Onshape CAD library has every profile in that kit as a configurable part, so instead of modelling each member yourself, you set its length and choose where the holes go. Copy it into your own workspace and build your crane from it.
What's included
The Onshape document has five Part Studios. Two are fixed reference parts taken from the course reader. The other three are the configurable parts you build the truss from.
- Base
- The reference foundation: two 600 × 3 × 32 mm strips, 500 mm apart, with Ø10 holes at 500 mm centre to centre. This is the anchor layout from Fig. 4 of the course reader, scaled 1:3. Fixed, not configurable.
- Base_mounting_plate
- The anchoring plate from Fig. 5 of the reader: 45 × 80 × 3 mm with R7.5 corners, a 2 × 3 grid of Ø4.5 holes at 15 mm pitch, and one Ø10 hole for the base. Fixed.
- Corner_profile
- L-angle, 15 × 15 × 3 mm (Fig. 6a). You choose the length and the holes on both legs.
- Strip_15
- Flat strip, 15 × 3 mm (Fig. 6b). You choose the length and the holes.
- Strip_50
- Flat strip, 50 × 3 mm (Fig. 6c), the stock for connectors and gussets. You choose the length and the holes.
Configuration options
When you insert Corner_profile, Strip_15 or Strip_50 into an assembly, Onshape asks for these inputs. All lengths are in millimetres.
| Input | Default | What it does |
|---|---|---|
| L | 300 mm | Total length of the member. |
| eA | 10 mm | Distance from end A to the centre of the first hole. End A is the end at the part's origin. |
| eB | 10 mm | The same distance, measured from end B. |
| p | 15 mm | Spacing to the second hole at an end. Only the ×2 options use it. |
| m | 150 mm | Position of the middle hole, measured from end A. It does not move when you change L. |
| End A, End B | Both | Which legs get holes at that end. Corner profile: Both, Leg 1, Leg 2, Leg 1 ×2, Leg 2 ×2, Both ×2 or None. Strips have a shorter list: the single-leg options and None. |
| Middle | None | Which legs get a hole at m. Corner profile: None, Leg 1, Leg 2 or Both. |
Fixed values
- Hole diameter
- Ø4.5 mm (M4 clearance)
- Material thickness
- 3 mm
- Hole gauge, corner profile
- 9 mm from the heel
- Hole gauge, strips
- Centred
How to use it
These steps assume you have never used Onshape before. They take you from a new account to a cut list for your crane.
-
Create a free Onshape account
Students can use Onshape's free Education plan.
-
Make your own copy
Open the library with the Open in Onshape button at the top of this page. The original is read-only, so click Make a copy to edit in the top left corner of the screen, and do all your work in the copy.
-
Insert the parts into an assembly
Create an assembly in your copy, or in a document of your own, and insert the Part Studios you need.
Inserting into a different document? Onshape can only insert from a saved version of another document, so create a version of your copy first. If there isn't one yet, Onshape offers to make it for you.
-
Set the length and the holes
As you insert a profile, set
L, the end distances and the hole options. To change a part you have already placed, right-click it and choose Edit configuration.
-
Mate the members hole to hole
Onshape finds a mate connector on the edge of every hole by itself, so you can join one member's hole straight onto another's.
-
Use the BOM as your cut list
Open the assembly's Bill of Materials and add the Configuration column. It lists every member with its settings, including its length. Add up the lengths for each profile type and check them against the course limits:
- Corner profile: 7 m at most
- 15 mm strip: 11 m at most
- 50 mm strip: 1.2 m at most
- Bolts: 50 of each length at most
Tips and limitations
- Gusset and connector plates are not included, because they depend on how you design your joints. Model them yourself in your copy.
- Check every dimension against this year's course reader. The kit can change from one year to the next.
- The middle hole position
mis always measured from end A. - Each configuration input controls specific hole features. The Configurations panel in each Part Studio shows exactly which.
Academic use
This is an independent student project, not an official TU/e resource.
It is a modelling tool and nothing more. It contains no design solution: your group's structure, analysis and choices remain your own.
Before you use it, check your course's rules on external resources, and verify every dimension yourself. It is provided as is, without any warranty.
How to cite
If you use the library in your report, you can cite it like this, in APA style:
Zaleckas, J. (2026). Truss Building Blocks for Onshape (Version 1.0) [CAD library]. https://jonaszaleckas.com/resources/truss-building-blocks
Licensed under CC BY 4.0, free to use and adapt with attribution.
Feedback
Used it for your crane, or found a mistake? I would like to hear either way. Email me at jonaszaleckaslt@gmail.com or send me a message on LinkedIn.
Changelog
- 1.0 ·
- Initial release.